Chemicalscatalysts & Chemical Auxiliary Agentschemical Auxiliary Agenthigh Molecular Weight Anionic/Cationic/Nonionic Polyacrylamide Price Flocculant for Was

• CAS No.: 9003-05-8
• Formula: (C3h5no)N/ [CH2-CH(Conh2)]N
• EINECS: 208-750-2
• Classification: Waste Water Treatment
• Grade Standard: Industrial Grade
• Kind: Flocculant Polymer
• Quality: First Class
• Single Package Size: 20X10X10 Cm
• Single Gross Weight: 1kg
• Appearance: White Fine-Sand Shaped Powder
• Purity: 100%
• Usage: Water Treatment Chemicals
• Degree of Hydrolysis%Ysis%: 10-40
• Advantage: Faster Sedimentation, Better Flocculation
• Transport Package: Standard Packing
• Trademark: JILIAN
• Origin: China

Product Description

Product Description

1. Significantly improve retention rate of the small fiber and filler of paper pulp, save pulp more than 50-80kg per MT paper.

2. Make the white water closed circulation system to operate well and give maximum power,  make the white water easy for clarification and reduce the concentration of loss of white water by 60-80%, reduce the salt content and BOD in the wastewater, reduce the pollution treatment cost.
3. Improve the cleanness of blanket, makes the machine operate better.
4. Make the beating degrees lower, speed up the drainage of wire, improve the speed of paper machine and reduce the steam consumption.
5. Effectively improve the paper sizing degree, especially for culture paper, it can improve the sizing degree about 30%, it can help to reduce the rosin size and usage of alminum sulfate  around 30%
6. Improve the wet sheet paper strength, improve papermaking conditions.




 

 

 

Product Parameters

Polyacrylamide dry powder
Project	Indicator
	Nonionic	Anionic	Cationic
Appearance	White or slightly yellow powder	White or slightly yellow powder	White or slightly yellow powder
Solid content≥%	90	90	90
Molecular weight(10000)	300-1200	500-2100	300-1200
Free monomer≤%	0.5	0.5	0.5
Water solubility(min)	90	60	60
Hydrolysis degree%	≤5	20-30	5-60

 

Application

Usage Method:

1.  Automatic dosing: LSR-20 emulsion→pump→automatic flow meter→automatic dilution tank→screw pump→ flow meter→ wire.

2.Manual dose: add enough water to dilution tank→ agitate→add lsr-20,

mix 10 - 20 minutes→ transfer into the storage tank→headbox

3. Note: the dilution concentration is generally 200 - 600 times (0.3%-0.5%), add place should choose high box or the pipe before wire box, the dosage is generally 300 - 1000 grams / ton (based on dry pulp)